Free Shipping

All Orders Over $50*

GlowShift 2010-2015 Dodge Ram 6.7L Cummins Fuel Pressure Big Line Kit

1494
1494

Are you installing a fuel pressure gauge into your 2010-2015 Dodge Ram 6.7L Cummins truck? Don’t forget to grab the GlowShift 2010-2015 Dodge Ram 6.7L Cummins 3/8” Fuel Pressure Big Line Kit! This big line kit is required to gain access to the injection pump inlet on your Cummins for extremely accurate readings directly from the source. This kit replaces the restrictive line from the fuel filter housing to the injection pump to allow your truck’s fuel system to flow smoothly.

This Dodge Ram 6.7L Cummins 3/8” Fuel Pressure Big Line Kit includes (1) 3/8” 4ft rubber fuel hose, (1) injection pump connector with O-ring, (1) brass push on hose connector, (1) T-fitting to install your fuel pressure sensor, (1) fuel filter housing quick connector and (4) hose clamps to secure the line to the fittings.

Cummins Big Line Kit

Adding the GlowShift 1/8 NPT Fuel Pressure Snubber Valve will work with the Big Line Kit to regulate the fuel pressure to eliminate any fuel pressure spikes that are present throughout the fuel system during the initial ignition and startup of your Cummins. These fuel pressure accessories allow you to monitor your truck’s fuel pressure to watch for any spikes in your fuel system which could cause early and unexpected failure of electronic fuel pressure sensors or sending units.

GlowShift offers the Big Line Kit for the 2007.5-2009 Dodge Ram 6.7L Cummins, although it is not essential for the fuel pressure gauge install on this vehicle, it is still highly recommended for extremely accurate fuel pressure readings, which allow for better monitoring of your Cummins’ fuel system.

GlowShift includes installation instructions, free lifetime technical support and a one year limited warranty with every purchase.

In this article