Are you driving a Ford Powerstroke 7.3L or 6.0L diesel engine and looking to monitor the high pressure that enters into the oil pumps? GlowShift introduces the High Pressure Oil Pressure Gauge which is electronically driven and will read your truck’s HPOP from 0 to 4,000 PSI with unrivaled accuracy.
Are you wondering why an HPOP gauge is so important for a diesel engine? HPOP is important for a diesel engine because the HPOP is what drives the injectors to supply fuel to the engine. The HPOP receives oil from the Low Pressure Oil Pump in order to drive the injectors, and the computer will then tell the injectors exactly when to fire. The pressures can be anywhere within the range of 500 – 3,000 PSI. With having a weak or defective HPOP, this could starve the injectors for fuel and could lead into other fuel system failures. An upgraded HPOP may be required if fuel injectors or the fuel system is upgraded, which is to ensure that there is sufficient fuel feeding the engine.
At the moment the High Pressure Oil Pressure Gauge is only available in our 7 Color Series with a white face, black face, or black face with tinted lens. The 7 Color HPOP Gauge features an illuminated red needle that sweeps 270 degrees as well as 7 color through dial LED lighting. The 7 Color through dial lighting allows you to easily select from 7 different solid color modes such as blue, green, red, teal, white, purple, or yellow, along with 2 color cycle modes that let you match your factory dash lights or add a custom style to your truck’s interior. The included color recall feature will remember the color the gauge was on prior to powering down your vehicle, so you will not have to set your gauge to your preferred color every time you start it up. If you choose to connect your gauge to the headlight switch, this will allow the gauge to dim 30% for easier gauge monitoring during the night.
GlowShift includes all necessary mounting hardware, installation instructions, free lifetime technical support, and a limited one year warranty with each HPOP gauge purchased. Installing the 7 Color HPOP Gauge is a breeze, simply connect the gauge’s sensor wires to the factory Injector Control Pressure Sensor (ICP Sensor) for extremely accurate gauge readings directly from the source.