Power Stroke Boost Sensor T-Fitting Adapter Now Available!

Just added to GlowShift’s product lineup is an installation accessory that will dramatically cut down the time it takes to install a boost gauge sensor. That installation accessory …

1514
1514

Just added to GlowShift’s product lineup is an installation accessory that will dramatically cut down the time it takes to install a boost gauge sensor. That installation accessory is our Boost T-Fitting Adapter! Installing this boost t-fitting adapter is extremely easy as you’ll simply cut your vehicle’s MAP line, insert the fitting into the two cut ends of the MAP line and tighten the hose around the t-fitting by using the two included hose clamps. You’ll then thread your 1/8-27 NPT boost pressure sensor or brass compression fittings into the open port of the t-fitting and you’re set! It’s that easy!

13_GS_Blog_Boost_T-Fitting_Sensor_Install

Using this boost t-fitting adapter allows you to avoid the process of drilling and tapping into your vehicle’s intake manifold. The t-fitting adapter can be installed to any vehicle with a 3/16” MAP line, but is mainly used for 1999-2002 7.3L Ford Power Stroke and/or 2003-2007 6.0L Ford Power Stroke Engines. GlowShift includes a one year limited warranty with each boost t-fitting adapter purchased, as well as including installation instructions and free lifetime technical support.

In this article