Daisy Chain Feature with Elite Series Gauges

Installing aftermarket gauges can become a messy process with all of the included power and sensor wire harnesses in one tight location of the pod. Luckily GlowShift’s Elite …

3273
3273

Installing aftermarket gauges can become a messy process with all of the included power and sensor wire harnesses in one tight location of the pod. Luckily GlowShift’s Elite Gauge Series and White Elite Gauge Series feature a daisy chain ability that allows you to power up to 4 gauges together in sequence with a minimal amount of wires used. The daisy chain feature frees up space inside the gauge pod for other wires such as sensor wiring and/or if you’re adding an external warning light. The first gauge of the sequence is the only gauge that you’ll have to connect to a power source and you can wire the remaining gauges to receive power from the first gauge with the included dual modular connection wire harnesses.

If you happen to be installing an Elite or White Elite Series Volt Gauge and utilize the daisy chaining ability, make sure the Volt Gauge is the first gauge of the daisy chaining sequence. If the Volt Gauge isn’t the first gauge of the sequence, it will not read correctly due to the drop in voltage used to power the gauge resulting in inaccurate volt readings. However, the drop in voltage will not affect any other gauge readings on your Boost, Oil Pressure, Fuel Pressure or Pyrometer EGT Gauge. GlowShift stands behind every gauge sold with a one year limited warranty, free lifetime technical support as well as including all necessary sensors, mounting hardware and installation instructions.

4-gauge-back-shot-daisy-chain

In this article